Quantitation in multianalyte overlapping peaks from capillary electrophoresis runs using artificial neural networks

The potentiality of artificial neural networks for multicomponent analysis in unresolved peaks from capillary electrophoresis (CE) is evaluated. The system chosen consists of mixtures of three ebrotidine metabolites, which cannot be successfully separated by CE. Data selected for analysis consist of UV spectra taken at the maximum of the CE peak. The most dissimilar analyte, in terms of spectral differences, is accurately quantitated in any type of mixture with an overall prediction error of 5%. Because of the strong interference of the two most overlapped compounds, a preliminary procedure for spectral data filtering based on principal component analysis is performed to improve their quantitation.     

Mixed-mode liquid chromatography coupled to tandem mass spectrometry for the analysis of aminoglycosides in meat

A novel LC-MS/MS method has been developed for the determination of 13 aminoglycoside antibiotics in meat products. Among the chromatographic columns tested, the mixed-mode Obelisc R provided the best performance. Electrospray has been used for the coupling of the LC and the effect of temperature on the ionization has been evaluated. The mass spectra of AGs have been studied in order to select the most adequate precursor and product ions for quantitation and confirmation in SRM mode, showing that the single charged [M+H]⁺ provided better precisions than the double charged [M+2H]²⁺. Accurate mass measurements have been performed in order to confirm the molecular composition of the product ions, allowing the establishment of a new mechanism for some product ions of STR and DHSTR. A sample treatment based on an extraction and a SPE clean-up has been applied to a wide variety of meat products such as frankfurters; sausages; and minced meat of pork, veal, and chicken. Method limits of quantitation in the low microgram per kilogram level (1–50 μg kg^?1), precisions %RSD below 15 % and accuracies expressed as relative errors below 23 % have been obtained, making the proposed method suitable for routine analysis.     

Determination of Free Metal Ion Concentrations Using Screen‐Printed Electrodes and AGNES with the Charge as Response Function

AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) has been implemented with screen‐printed electrodes (SPE) for the determination of the free concentration of Zn²⁺, Cd²⁺ and Pb²⁺. For SPE, the stripped charge is a suitable response function which does not require the second stage of AGNES to be under diffusion limited conditions. This property can be used in the avoiding of the interference of Pb on [Cd²⁺] determination. The proportionality factor between stripped charge and concentration of amalgamated metal depends on the volume of mercury and opens the way to a future calibrationless strategy. Zn and Cd complexation with oxalate at various pH‐values confirms the suitability of the developed methodology, which compares favourable with the standard one based on the Hanging Mercury Drop Electrode.     

Analysis of chlormequat and mepiquat by hydrophilic interaction chromatography coupled to tandem mass spectrometry in food samples

In this work a LC–MS/MS method for the determination of two quaternary ammonium growth regulators (chlormequat and mepiquat) in food is reported. The separation was based on hydrophilic interaction liquid chromatography (HILIC) without the use of ion-pair reagents. A gradient elution of acetonitrile and formic acid/ammonium formate buffer from 60 to 40% acetonitrile was enough to achieve a resolution >1.5 in less than 4.0 min. The HILIC system was coupled to a triple quadrupole mass spectrometer equipped with a heated electrospray probe (H-ESI) providing sub-pg LODs in SRM mode. A straightforward sample treatment (SPE C18 clean-up) was enough to provide MLODs at low ppb levels when analysing a range of food samples that covered different kinds of matrices such as fresh fruit, vegetables, fruit juices, baby food, bread, coffee and beer. Chlormequat was found in seven samples (0.8–126 ng/g) but mepiquat was only detected in bread and coffee samples (0.9–166 ng/g).     

Assessment of trace metal binding kinetics in the resin phase of diffusive gradients in thin films

The dynamic technique of diffusive gradients in thin films (DGT), that measures metal speciation in situ, has found wide environmental application. Simple interpretation of the metal accumulation in terms of a solution concentration has assumed that trace metals do not penetrate beyond the surface of the binding layer, but penetration, although theoretically discussed has not yet been directly measured. Multiple binding layers were used to enable analysis of different depths of a DGT binding phase (Chelex-100 or iminodiacetate resins). In simple metal solution (no ligand) at pH 7, metal penetration to the back layer was low and similar for all metals. However, at lower pH up to 42% of an individual metal accumulated in the back resin layer. This was most noticeable for Mn at pH 4 and 5, but Cd and Co were also affected at pH 4. These results were consistent with rate limited binding, particularly for Mn. A kinetic model successfully fitted the data and allowed derivation of a binding rate constant and the mean distance that metals penetrate into a resin gel (λ_M). Only for Mn, Co and Cd were experimentally derived λ_M values greater than the diameter of a Chelex-100 resin bead. For most situations, then, the penetration into the binding layer is negligible and binding of trace metal ions can be regarded as instantaneous, validating the simple use and interpretation of DGT. For weakly binding metals at low pH the slower binding allows penetration, which may affect the DGT measurement.     

Ultra-high performance liquid chromatography-tandem mass spectrometry for the analysis of phenicol drugs and florfenicol-amine in foods

A method based on ultra-high performance liquid chromatography (UHPLC) is proposed for the determination of chloramphenicol (CAP), its related compounds, thiamphenicol (TAP) and florfenicol (FF), and the polar metabolite florfenicol-amine (FFA), in animal-derived foods (chicken and pork meat, fish, prawns and honey). For the retention of FFA and its simultaneous analysis with the parent compounds a phenyl-hexyl column is proposed. A fast separation is achieved in less than 2 minutes using a methanol : acetic acid-ammonium acetate buffer (5 mM, pH 5) and gradient elution. Under these conditions, the FFA is retained at more than twice the dead volume, as recommended by the legislation. For the coupling with mass spectrometry, heated-electrospray (H-ESI) is used as ionisation source improving vaporization efficiency. To prevent interferences using selected-reaction monitoring (SRM) both quantitation and confirmation transitions were carefully selected. Two different sample treatments based on solid-phase extraction with mixed-mode cartridges for fish and meat products and hydrophilic-lipophilic-balanced cartridges for honey are proposed, providing limits of quantitation (LOQs) below μg kg(-1) level.     

Lability criteria in diffusive gradients in thin films

The penetration of metal complexes into the resin layer of DGT (diffusive gradients in thin films) devices greatly influences the measured metal accumulation, unless the complexes are either totally inert or perfectly labile. Lability criteria to predict the contribution of complexes in DGT measurements are reported. The key role of the resin thickness is highlighted. For complexes that are partially labile to the DGT measurement, their dissociation inside the resin domain is the main source of metal accumulation. This phenomenon explains the practical independence of the lability degree of a complex in a DGT device with respect to the ligand concentration. Transient DGT regimes, reflecting the times required to replenish the gel and resin domains up to the steady-state profile of the complex, are also examined. Low lability complexes (lability degree between 0.1 and 0.2) exhibit the longest transient regimes and therefore require longer deployment times to ensure accurate DGT measurements.     

On-line solid phase extraction fast liquid chromatography–tandem mass spectrometry for the analysis of bisphenol A and its chlorinated derivatives in water samples

In this study an on-line column-switching fast LC–MS/MS method was developed to analyze bisphenol A (BPA) and its chlorinated derivatives in water. Fast liquid chromatographic separation was performed on a C18 reversed phase column based on fused-core particle technology (2.7 μm particle size) providing analysis times shorter than 3 min and high peak efficiencies. The main benefit of this LC system is that it can easily be hyphenated to a conventional on-line preconcentration device allowing the direct analysis of water samples without any pretreatment at concentrations levels down to 60 ng L⁻¹ and preventing contaminations frequently reported in the analysis of BPA. This on-line SPE fast LC system was coupled to a triple quadrupole mass spectrometer operating in enhanced mass resolution mode (Q1 FWHM = 0.7 Th, Q3 FWHM = 0.1 Th) in order to minimize interferences and chemical noise. This highly sensitive and selective method was successfully employed to analyze BPA and its chlorinated derivatives in water samples.